The MSE Crusher Wall at Nevada Mine was constructed in 2013. The wall construction was provided by EarthTech West, Ltd, and the wall was designed by Collins Engineering.

Wall Details:

• Welded Wire Wall for Crusher & ArtWeld Gabion Wall (on top of WWW Crusher Wall)
• Maximum Wall Height of 114’
• Maximum Mat (spliced) Length of 80’
• Loads: uniform live load surcharge of 900 psf, for CAT 795 haul truck
• Seismic acceleration of 0.185 g
• 20-year design life – Hot Dip Galvanized steel
• 31,352 SF of Welded Wire Wall & 140 CY of ArtWeld Gabions, 9 gauge, galvanized

The Sorting Facility Ramp project is a mining project constructed in June 2018. The project is located in Montana. The maximum wall height is 28 feet and 8,440 square feet. The designer of the wall was CESaretti Engineered Solutions.

The Nye, Montana Mining Project was constructed in September 2018. The project is located in Nye, Montana. The wall designer was CESaretti Engineered Solutions. 

WALL DETAILS:
•    Welded Wire Wall (one angle point)
•    Maximum Wall Height of 18’
•    Maximum Mat Length of 14’
•    Loads: Factor bearing load – 3,500 psf.
•    Maximum ground acceleration coefficient, A=0.150
•    75-year design life – Black Steel
•     2,592 SF (57 AWG)
 

The Chirano Ghana Mine project was constructed in 2013, and is located in Ghana, West Africa.  The wall was designed by SHN Consulting Engineers & Geologists.

Wall Details:

• Welded Wire Walls (two walls with one angle point each)
• Maximum Wall Height of 42’
• Maximum Mat Length of 32’
• Loads: 3’ soil surcharge, 375 psf.  CAT 998B, 1,900 psf
• Lower tier of headwall is 2,200 psf from the crusher supports.
• 50-year design life – Hot Dipped Galvanized steel
• 581.20 SM / 6256 SF of Welded Wire Wall

The SH 145 San Miguel County Project is a Welded Wire Wall Constructed in 2019 in Telluride Co.  The SH 145 San Miguel County wall is owned by the Colorado Department of Transportation and was built by Telluride Gravel, Inc. The wall is 20' tall and 15,500 sf, and was designed by Yeh and Associates.

The Lakewood Dam Repair project is an ArtWeld Gabion wall.  The Lakewood Dam Repair project was constructed in 2019 by Sierra Mountain Construction Inc.  It Consists of 137 cy of Artweld Gabions and is owned by the Tuolumne Utilities District and was designed by Condor Earth Technologies, Inc.

The Quartz Hill Project is an ArtWeld Gabion Wall that was built in 2019.  The Quartz Hill wall is 18 feet tall and 1,230 cy of ArtWeld Gabions.  The Owner of the wall is the City of Redding and it was built by Eddie Axner Construction.

The Highlander Accelerator, is a ArtWeld Gabion project constructed in 2016. The Highlander Accelerator consists of 360 cy of Artweld Gabions.  This is a privately owned project, and was constructed by Linhart Construction, Inc.

The 26th Street & Southeastern Ave. project is a temporary Welded Wire Wall Constructed in 2019.  This Welded Wire Wall is 28 feet tall and 9,000 sf. The owner of the wall is South Dakota Dept. of Transportation, it was designed by SHN Engineering, and constructed by Linhart Construction, Inc.

The Wisconsin Frac Sand Plant is a Welded Wire Wall that was constructed in 2012. The Wisconsin Frac Sand Plant is located in Dovre, WI. The wall was designed by Collins Engineers Inc., and built by Highway Landscapers.

Wall Details:

•    Welded Wire Wall, 2 angle points
•    Maximum Wall Height of 36’
•    Maximum Mat Length of 26’
•    Uniform live load surcharge of 380 psf
•    40-year design life – hot-dipped steel
•    3,608 SF