The Sorting Facility Ramp project is a mining project constructed in June 2018. The project is located in Montana. The maximum wall height is 28 feet and 8,440 square feet. The designer of the wall was CESaretti Engineered Solutions.

The Nye, Montana Mining Project was constructed in September 2018. The project is located in Nye, Montana. The wall designer was CESaretti Engineered Solutions. 

WALL DETAILS:
•    Welded Wire Wall (one angle point)
•    Maximum Wall Height of 18’
•    Maximum Mat Length of 14’
•    Loads: Factor bearing load – 3,500 psf.
•    Maximum ground acceleration coefficient, A=0.150
•    75-year design life – Black Steel
•     2,592 SF (57 AWG)
 

The Chirano Ghana Mine project was constructed in 2013, and is located in Ghana, West Africa.  The wall was designed by SHN Consulting Engineers & Geologists.

Wall Details:

• Welded Wire Walls (two walls with one angle point each)
• Maximum Wall Height of 42’
• Maximum Mat Length of 32’
• Loads: 3’ soil surcharge, 375 psf.  CAT 998B, 1,900 psf
• Lower tier of headwall is 2,200 psf from the crusher supports.
• 50-year design life – Hot Dipped Galvanized steel
• 581.20 SM / 6256 SF of Welded Wire Wall

The Crusher Wall at Butler Quarry project is a Welded Wire Wall Constructed in 2004.  The wall is located in Butler, Kentucky and was designed by Geotechnical Design Services.

Wall Details:

• Crusher Wall: 3,792 SF, variable base

• 20 year design life (Non-Galvanized Steel )

• Seismic Acceleration of 0.1g

• Design Loading: CAT 785C Off-Highway Mine Truck (550,000 lbs. GVW)

• Maximum Wall height 46’

• Maximum Mat length of  42’

The Bingham Canyon Mine 2002 is a Welded Wire Wall that was constructed in 2002 by Ames Construction Inc., and was designed by Geotechnical Design Services Inc.

Wall Details:

• West Wing Wall: 6,144 FSF (supplied)
• 20 year design life
• Design Loading: Crane CT-2000 Transporter; Maximum Load of 8.5 ksf
• 3 angle points
• Maximum Wall height 42’
• Maximum Mat length of  35’
• Truck Dump Wall: 24,208 FSF (supplied)
• Design Loading: CAT 797 Truck
• 5 angle points
• Maximum Wall height 62’
• Maximum Mat length 40’ 

The Aggregate Plant project is a Welded Wire Wall that was constructed in 2018.  This Welded Wire Wall is located in Wise County Texas. The wall was designed by Cesaretti Engineered Solutions, and built by Ratech Construction, Inc.

Wall Details:

•    Welded Wire Wall (two angle points)
•    Maximum Wall Height of 34’
•    Maximum Mat Length of 24’
•    Loads: Traffic surcharge live loading – Cat 772G Truck -
•    Maximum ground acceleration coefficient, A =01.00
•    10-year design life – Non- Galvanized
•     6,304 SF
 

The Wisconsin Frac Sand Plant is a Welded Wire Wall that was constructed in 2012. The Wisconsin Frac Sand Plant is located in Dovre, WI. The wall was designed by Collins Engineers Inc., and built by Highway Landscapers.

Wall Details:

•    Welded Wire Wall, 2 angle points
•    Maximum Wall Height of 36’
•    Maximum Mat Length of 26’
•    Uniform live load surcharge of 380 psf
•    40-year design life – hot-dipped steel
•    3,608 SF
 

The Lannon Quarry Stationary Jaw Plant Crusher is a Welded Wire Wall that was constructed in 2016.  The Wall is located in Lannon, WI, and designed by CESaretti Engineered Solutions.

Wall Details:

• Welded Wire Wall, two angle points
• Maximum Wall Height of 34’
• Maximum Mat Length of 24’
• Live Traffic Surcharge - Loaded CAT 777 Loader on a 34’x21’ Distribution Slab – 505  psfDead Load – 2.0’ Thick Concrete Distribution Slab – 300 psf
• 50-year design life – Hot Dip Galvanized steel
• 5,672 SF

The California Asbestos Mine project is a Welded Wire Wall constructed in 2017. The California Asbestos Mine Wall is located Calaveras County, California. The wall designer for the project was CESaretti Engineered Solutions and the contractor was FORD Construction Company, Inc.

Wall Detals:

•    Welded Wire 
•    Maximum Wall Height of 36’
•    Maximum Mat Length of 26.25’
•    Loads: traffic surcharge - (Typical Traffic Load) 250psf, occasional small trucks.
•    100-year design life – Hot-Dipped Galvanized 
•    18,672 SF (6 AWG)