The Mariposa Port of Entry Project is a Welded Wire Wall and ArtWeld Gabions.  The Mariposa Port of Entry wall is 52 feet tall and 86,000 sf, and also consists of 500 cy of Artweld Gabions.  The Wall is owned by the General Services Administration Public Building Service, it was designed by Geotechnical Design Systems, and was built by Advanced Paving and Construction. 

The US 97: Modoc Point Project is a Steepened Slope Wall with a ERS Wall and ArtWeld Gabions at the base, and was constructed in 2010.  The US 97: Modoc Point Project is 160 feet tall and 104,000 sf of Steepened Slope.  The ERS at the base is 20 feet tall and 17,500 sf with 1850 cy of ArtWeld Gabions for an overall height of over 180 feet. The wall is owned by the State of Oregon Dept. of Transportation, it was designed by Ontiveros & Associates, and was built by K&E Excavating.

The Aggregate Plant project is a Welded Wire Wall that was constructed in 2018.  This Welded Wire Wall is located in Wise County Texas. The wall was designed by Cesaretti Engineered Solutions, and built by Ratech Construction, Inc.

Wall Details:

•    Welded Wire Wall (two angle points)
•    Maximum Wall Height of 34’
•    Maximum Mat Length of 24’
•    Loads: Traffic surcharge live loading – Cat 772G Truck -
•    Maximum ground acceleration coefficient, A =01.00
•    10-year design life – Non- Galvanized
•     6,304 SF
 

The Riverwalk 7 project is a ArtWeld Gabion job constructed in 2015.  The Riverwalk 7 project is located on Rosovelt Island, New York. It consists of 45 cubic yards of Artweld Gabions.  The Owner is The Hudson Companies Inc,. and the contractor was Tony Casale Inc.

The BNSF EAVAN Crossover Project is a welded wire wall constructed in 2014. The BNSF EAVAN Crossover wall is located in Clark County, Washington. The wall height is 18 feet and is 25,000 square feet. The owner of the wall is BNSF Railway. The wall designer was Ontiveros, Cesaretti & Prebor and the contractor was Nutter Corportation.

The Lilliwaup Falls Power Project is a Welded Wire Wall constructed in 2014. The project is located in Mason County, WA. The wall height is 54 feet and 6,064 square feet. The owner of the wall is Lilliwaup Falls Generating Co. The wall designers for the project were Ontiveros, Cesaretti & Prebor/Jacobs Associates and the contractor was Granite Construction Company.

The DesMarais Gabions project is ArtWeld Gabions constructed in 2017. The gabions are located in Saguache County, Colorado. The wall height is 6 feet and is 216 cubic yards. The gabions are privately owned. The contractor for the project was SkyHawk construction.

the Toms Thumb Trailhead project is Artweld Gabions and was constructed in 2017. The Tom Thumb Trailhead Gabions are located 23015 N 128th St, Scottsdale, Arizona. The wall height is 6 feet and is 294 cubic yards. The owner if the wall is City of Scottsdale Public Improvements. The wall designer of the project was City of Scottsdale Public Improvements and the Contractor was Valley Rain Construction.

the Private Residence project is an ArtWeld Gabion Wall and was constructed in 2017. These gabions are located in El Paso County, Texas. The height of this wall is 5 feet and is 27 cubic yards. The owner, contractor, and wall designer are Charles Staniszewski

The Ventana Ranch Park project is an ArtWeld Gabion Wall and was constructed in 2010. The Ventana Ranch wall is located in Albuquerque, New Mexico. The wall is 757 Cubic Yards and 9 feet tall. The wall is owned by the City of Albuquerque. The project contactor was the Valley Fence Company.