The Round Mountain Nevada Primary Crusher Relocation is a Welded Wire Wall that was constructed in 2008 by EarthTech West, Ltd.,  and was designed by Tom Jepsen, P.E.

Wall Details:

• Welded Wire Wall
• 20-year design life 
• Loads: CAT 793B, Confined to a concrete slab.
• Maximum calculated applied bearing pressure = 10,340 psf
• Maximum Wall Height of 58’
• Maximum Mat Length of 42’
• 17,880 SF

The Mazapil Mine, Mill Access Road is a Welded Wire Wall that was constructed in 2010 by Minera Peñasquito S.A. de C.V. with technical assistance by EarthTech West, Ltd., and was designed by Collins Engineers, Inc.

Wall Details:

    • Welded Wire Wall
    • 50-year design life [accelerated corrosion]
    • Loads: DL: 750 kg/m2 (150 PSF);  LL: 2,440 kg/m2 (500 PSF) &  standard AASHTO HS-20 truck              loading.
    • Maximum Wall Height of 43’
    • Maximum Mat Length of 28’
    • 12,536 SF (1,165 SM)
 

Meeker Colorado Mining Project is a hot dipped galvanized welded wire wall. The project is located in Meeker, CO 81641. The maximum wall height is 26 feet and 15,648 square feet. The wall designer is Jepsen Engineering.

The Manquin, Va Mining project is a welded wire wall constructed in March 2018. The project is located 1045 Dabneys Mill Rd., Manquin, VA 23106. The maximum wall height is 22 feet and 1200 square feet. 

The Bingham Canyon Mine 2002 is a Welded Wire Wall that was constructed in 2002 by Ames Construction Inc., and was designed by Geotechnical Design Services Inc.

Wall Details:

• West Wing Wall: 6,144 FSF (supplied)
• 20 year design life
• Design Loading: Crane CT-2000 Transporter; Maximum Load of 8.5 ksf
• 3 angle points
• Maximum Wall height 42’
• Maximum Mat length of  35’
• Truck Dump Wall: 24,208 FSF (supplied)
• Design Loading: CAT 797 Truck
• 5 angle points
• Maximum Wall height 62’
• Maximum Mat length 40’ 

The Aggregate Plant project is a Welded Wire Wall that was constructed in 2018.  This Welded Wire Wall is located in Wise County Texas. The wall was designed by Cesaretti Engineered Solutions, and built by Ratech Construction, Inc.

Wall Details:

•    Welded Wire Wall (two angle points)
•    Maximum Wall Height of 34’
•    Maximum Mat Length of 24’
•    Loads: Traffic surcharge live loading – Cat 772G Truck -
•    Maximum ground acceleration coefficient, A =01.00
•    10-year design life – Non- Galvanized
•     6,304 SF
 

The Wisconsin Frac Sand Plant is a Welded Wire Wall that was constructed in 2012. The Wisconsin Frac Sand Plant is located in Dovre, WI. The wall was designed by Collins Engineers Inc., and built by Highway Landscapers.

Wall Details:

•    Welded Wire Wall, 2 angle points
•    Maximum Wall Height of 36’
•    Maximum Mat Length of 26’
•    Uniform live load surcharge of 380 psf
•    40-year design life – hot-dipped steel
•    3,608 SF
 

The Lannon Quarry Stationary Jaw Plant Crusher is a Welded Wire Wall that was constructed in 2016.  The Wall is located in Lannon, WI, and designed by CESaretti Engineered Solutions.

Wall Details:

• Welded Wire Wall, two angle points
• Maximum Wall Height of 34’
• Maximum Mat Length of 24’
• Live Traffic Surcharge - Loaded CAT 777 Loader on a 34’x21’ Distribution Slab – 505  psfDead Load – 2.0’ Thick Concrete Distribution Slab – 300 psf
• 50-year design life – Hot Dip Galvanized steel
• 5,672 SF

The Lilliwaup Falls Power Project is a Welded Wire Wall constructed in 2014. The project is located in Mason County, WA. The wall height is 54 feet and 6,064 square feet. The owner of the wall is Lilliwaup Falls Generating Co. The wall designers for the project were Ontiveros, Cesaretti & Prebor/Jacobs Associates and the contractor was Granite Construction Company.

The Caltrans 01-0A5204 project is a Welded Wire Wall and was built in 2016. The wall is located on Route 299, E of Chezem Rd, Humboldt County, California. The wall height is 16 feet and is 12464 square feet. Caltrans is the owner of the wall. CESaretti Engineered Solutions was the wall designer for the project and R Brown Construction Co., Inc. was the contractor.