The Upper Salmon Falls Dam project is a Welded Wire Wall that was constructed in 2019, and is located on Upper Salmon Falls Rd, Hagerman, ID 83332.  The Upper Salmon Falls Dam wall is 22 feet tall and 3500 sf.  The wall was constructed by Concrete Placing Co., Inc., designed by Stanley Crawforth with American Geotechnics, and owned by the Idaho Power Company.

Drone Footage

The Bull Arm Mining Project Is a welded wire wall constructed in December 2012 located in Bull Arm, Newfoundland, Canada. The wall designer was Geotechnical Design Services and the wall builder was Kiewit-Kvaerner Contractors. Materials. 

Wall Details:

• Welded Wire Wall
• Maximum Wall Height of 26’
• Maximum Mat Length of 18’
• 2-year design life – non-galvanized
• 4,040 SF

The CA ERFO Santa Ysabel 46(1) Angel Mountain Road is a Welded Wire Wall that was constructed in 2019.  The wall is 1,232 sf, and 16 feet tall.  It was built by Brayco Engineering, designed by CESaretti Engineered Solutions / NV5, and is owned by the U.S. Departement Of Transportation Federal Highway Administration.

Voca Facility Crusher Retaining Wall, HRW: 110616AW was constructed in August 2011.The wall was designed by Jerold Bishop, P.E., Geotechnical Design Systems Inc.

Wall Details:

Welded Wire Wall for Crusher & ArtWeld Gabion Wall (on top of WWW Crusher Wall)

• Welded Wire Wall (one angle point)
• Maximum Wall Height of 28’
• Maximum Mat Length of 21’
• Loads: Designed for CAT 770 Off-Highway Mine Trucks and CAT 980 Loaders operating on top of an assumed 2-foot thick reinforced concrete slab/bumper block.
• Seismic acceleration of 0.1g
• 30-year design life – hot-dipped steel
• 3,024 SF

The Copperstone Mine Wall in Quartzite, Arizona was constructed in September 2011. The wall construction was provided by Larry Finman with Finman & Associates,  inc. The wall was designed by : Kirk Cesaretti, P.E., Ontiveros & Associates.

Wall Details:

• Welded Wire Wall (three angle points) and ArtWeld Gabions
• Maximum Wall Height of 26’
• Maximum Mat Length of 21’
• Dead & Live (Traffic) Loading:Two dead loads have been applied to the top of the Wire wall. The concrete Slab is assumed to be 18” thick.  Contributing a 225 psf surcharge directly above the wall. The Gabion wall dead load is assumed to be a 810 psf strip (3’ wide) load directly above the face of the wall. The JD300D Haul Truck is specified loaded at 103.108 lbs.  This load has been evenly distributed upon the concrete dump slab across the footprint of the truck (20.25’x7.75’).  This live load is equivalent to 660 psf and has been applied to all areas beyond the Gabion barrier and directly above the wall at the dump site.
• Maximum ground acceleration coefficient, A = 0.100
• 30-year design life – black steel (non-galvanized)
• 3808 SF of Welded Wire Wall and 76 CY of ArtWeld Gabions

The Mallard Pointe Project is a Spiralnail-Wiretruss Wall located in Issaquah, WA that was constructed in 2019.  The wall consists of 4200 sf of Truss Panels, and 586 Spiralnails. The max height of the truss panels is  18', with an overall max wall height of 30'. The wall is privately owned, was built by Steve Burnstead Construction / Omega Construction, Inc., and was designed by Aziz Engineering Company.

Cowlitz Valley ERFO Repairs Phase 3 is a Steepened Slope wall that is 25 feet tall and 1,500 sf. .  The wall is located near Randle in Lewis County WA, and was constructed in 2019 by AM Excavating, LLC. The wall is owned by the USDA Forest Service Region 6.

Hot Wheels Base Terminal at Alpine Meadows is a Welded Wire Wall that was constructed in 2019.  The wall is 4,500 sf and also consists of 111 cy of ArtWeld Gabions at the top. The wall is located at the Alpine Meadows Treeline Cirque lift, and is owned by Squaw Valley / Alpine Meadows.

The Spruce Railroad Seg A/B is a Welded Wire Wall located near Port Angeles, WA.  The Wall is 2,850 SF and 18' tall. It was constructed in 2019 by Bruch & Bruch Construction and was designed by Cesaretti Engineer Solutions.  The owner of the wall is the US Dept. of the Interior, Natl Park Service / FHWA.

I-84 Rockfall is a Eureka Reinforced Soil wall.  The wall was built in 2004 and is located in The Dalles, Oregon.  The wall is 18 feet tall and 4,720 sf, and was designed by SHN Consulting Engineers.